The E3 Series chassis is a high performance
design in a low cost 2U rackmount enclosure.
Feature rich, the E3 Series is a solid,
robust design which will meet the most
rigorous and demanding requirements.
This chassis is ideal for high density
I/O intensive applications.
The enclosure
is constructed of 18 gauge steel, clear
zinc plated for corrosion protection
and an attractive appearance. The front
panel is attractively detailed and is
of heavier gauge than the chassis.
The E3 provides
for one externally accessible 5-1/4
inch and one 3-1/2 inch drive bays.
In addition, six hot swap SCSI SCA-2
drives provide for a huge amount of
drive space. The SCSI drives can easily
be configured for a large RAID. The
E3 is ideal for data intensive or mission
critical applications.
The chassis is
cooled by four 80mm 42CFM ball bearing
fans. Air flow is in through a front
mounted air filter. The fans are mounted
mid-chassis to help cool the drives.
A thermal management card monitors fan
operation and chassis temperature providing
both an audible alarm and contact closure
output.
A door covers and
protects the drives. Accessible behind
the door is the power and reset switches
as well as the power-on and drive activity
LED's and USB extension ports. The LED's
are visible through the door when it
is closed.
The E3 Chassis
provides for mounting a standard EATX
motherboard up to 12 x 13-inches. Three
plug-in cards can be installed using
the included riser card. Additionally,
several riser card options are available.
19" (wide)
x 2U (3.5") (high) x 25.6" (deep)
Weight - 41.8 lbs / 19 kgs
Drive Capacity
One 5-1/4 inch drive - front accessible
One 3-1/2 inch drive - front accessible
Six hotswap SCSI SCA-2 drives
SCAM compliant supporst SE , LVD , U2 &
Ultra 160 system, transfer rate up to 160MB/Sec
Front Panel Controls
Power switch
Reset switch
Alarm reset switch
Power LED
Drive Activity
Two port USB extension connector
Rear Panel Details
3 Plug-in card slots
ATX I/O Shield
Cooling
Four 80mm 42CFM fans
Fans are mounted mid-chassis to assist with
drive cooling
Thermal Management
Board
Monitors
the following chassis parameters. Audible
alarm sounded on system failure. Rear
panel mounted terminal block for NO/NC
contact closure for external alarm.
Fan
operation
Chassis
over-temperature settable for 40,
50, 60 deg C alarm point
Two
remote chassis temperature probes.
Power
supply operation
Front
panel indication of system alarm status
Power Supply
Rear Mount
2U style
AC Supply - Zippy P2U or P2G form factor
DC Supply - D2U form factor, 48VDC only available
Power supply not included.
Motherboard Mounting
Standard EATX 12 x 13-inch motherboard
Motherboard adapter plate accommodates any
motherboard
Plug-in I/O Cards
Accommodates
three plug-in I/O cards
Full length cards supported
Includes 3-slot 32-bit standard 5V PCI riser
card
Chassis Plans is more than a chassis
supplier. We offer a complete product
line including the latest motherboards,
drives, video boards and plug-in cards
including analog/digital I/O cards.
Integrating today's complex systems
can be a challenge. Allow us to provide
you with a professionally integrated
system with the OS loaded and the system
tested and burned-in as a complete unit.
We stand behind our work 100%.
